Type "A" Appliance Panels

• 11" (280mm) minimum width
• 11" (280mm) minimum height
• Type "A" appliance panels have a uniform 1¼" coved perimeter, 1¼" thick at the edge
• Square, arch, or cathedral raised panels are available
• Type "A" appliance panels are available in panel over panel design
• Only the upper panel will be affected in arch or cathedral applications
• Woodgrains on all door styles are pressed with grain running vertically

Type "B" Appliance Panels

• 12" (305mm) minimum width
• 11" (280mm) minimum height
• Type "B" appliance panels have a uniform 1¼" coved perimeter on 3 sides and a 2¼" cove on one side. This will allow additional space under continuous handles on some appliances. All four outer edges finish ¼" thick
• Square, arch, or cathedral raised panels are available. Arch or cathedral type "B" appliance panels require selection of 2¼" cove on the right (B1) or left (B2).
• Type "B" appliance panels are available in panel over panel design
• Only the upper panel will be affected in arch or cathedral applications
• Woodgrains on all door styles are pressed with grain running vertically

Type "C" Appliance Panels

• 11" (280mm) minimum width
• 5½" (140mm) minimum height
• Type "C" appliance panels (slab type) have a 1¼" coved perimeter on all 4 sides
• Square, arch, or cathedral raised panels are not available
• Woodgrains on type "C" appliance panels are pressed with grain running horizontally

Type "P" Panel Over Panel

• 9" (229mm) minimum width
• 16" (419mm) minimum height
• Square, arch, or cathedral raised panels are available only on the upper panel
• Woodgrains on all door styles are pressed with grain running vertically

Type "H" Horizontal Panel

• 16" (419mm) minimum width
• 9" (229mm) minimum height
• Available in square raised panel only